{
  "updated": "2026-10-10",
  "status": "partial_cold_C_hold_only",
  "source": "static_c_stubtrackservo_T0.5",
  "physics": "Free guitar; torque-limited joint motors and mj_step; nmocap=0, neq=0.",
  "model_scope": "Reduced strings: collision/dynamic nodes only near frets0–5 and picking window. Missing dynamic mass rigidly lumped into guitar; not a validated full-string replacement.",
  "duration_s": 0.5000000000011587,
  "fret_tail50ms_mean_N": [
    1.771537956469482,
    2.7065646896593814,
    1.413079208465804
  ],
  "fret_post150ms_positive_fraction": [
    1.0,
    1.0,
    1.0
  ],
  "left_wrong_string_peak_N": 0.0,
  "tilt_tail50ms_deg": 8.304824863534991,
  "pick_relative_displacement_end_mm": 2.9553544802210556,
  "nut_world_displacement_end_mm": 9.845804474269668,
  "max_soft_overlap_mm": 0.08455006573123824,
  "sampled_motor_limit_fraction": 0.6063051559064776,
  "limitations": [
    "Cold C initialization, not continuous reaching or dataset retarget validation",
    "No pluck executed; not a completed seated-playing milestone",
    "Remaining slow drift; no long-duration robustness claim",
    "Original fine-string confirmation and continuous approach are separate experiments; their outcomes are not represented by this hold result"
  ],
  "audit": {
    "scope": "REDUCED STRING CANDIDATE dt2.5us, added right forearm motor feedforward ramp 18.5N over100ms based on observed baseline support force, not a guaranteed actual force; right reference step cap0.02rad per10ms instead of0.006; adds right pick position feedback1500N/m and60Ns/m mapped to existing capped real arm motors, no desired joint velocity feedforward; adds100Hz collision-aware right pick position/normal IK with guitar-relative forearm support normal reference: gaps noncollidable, omitted dynamic mass rigidly lumped. Cold-reset static C with source finger PD+feedforward through bounded torque motors; removes unintended position-reference clipping, keeps original joint/force limits; no reaching/robustness claim. Thumb adapted; source4.5N feedforward rotated to free-guitar frame; arm task wrench mapped to real G1 joints;additionalCartesian1500N/m,60Ns/m,8Nm/rad,0.25Nms/rad feedback through capped real arm motors;old rigid-support arm joint reference preload removed, all physical properties and gains unchanged;100Hz reference IK tracks source-C guitar-relative wrist x/y and orientation, with initial world wrist height retained for neck support.",
    "source_files": [
      "static_c_stubtrackservo_T0.5.npz"
    ],
    "duration_s": 0.5000000000011587,
    "contacts": [
      {
        "finger": "index_finger",
        "string": 5,
        "fret": 1,
        "tail50ms_fret_mean_N": 1.771537956469482,
        "tail50ms_fret_min_N": 1.7415796510564279,
        "post_loading_positive_fraction": 1.0,
        "post_loading_above002N_fraction": 1.0,
        "post_loading_min_N": 1.6327733588830506
      },
      {
        "finger": "middle_finger",
        "string": 3,
        "fret": 2,
        "tail50ms_fret_mean_N": 2.7065646896593814,
        "tail50ms_fret_min_N": 2.670279689698215,
        "post_loading_positive_fraction": 1.0,
        "post_loading_above002N_fraction": 1.0,
        "post_loading_min_N": 2.6054689266682702
      },
      {
        "finger": "ring_finger",
        "string": 2,
        "fret": 3,
        "tail50ms_fret_mean_N": 1.413079208465804,
        "tail50ms_fret_min_N": 1.3543670447914966,
        "post_loading_positive_fraction": 1.0,
        "post_loading_above002N_fraction": 1.0,
        "post_loading_min_N": 1.2387802952830604
      }
    ],
    "tail_start_s": 0.45,
    "post_loading_start_s": 0.15,
    "left_wrong_string_peak_N_all_steps": 0.0,
    "tail50ms_sampled_other_string_contact_peaks_N": {},
    "tail50ms_chest_contact_fraction": 1.0,
    "tail50ms_thigh_contact_fraction": 1.0,
    "tail50ms_face_deg_mean": 8.304824863534991,
    "tail50ms_face_deg_range": [
      8.289603116590603,
      8.320345206742722
    ],
    "tail50ms_head_deg_mean": 0.6738776997208125,
    "tail50ms_wrist_error_mm": 1.4307021397064363,
    "tail50ms_com_drift_mm": 0.08859886921736862,
    "sampled_joint_limit_excess_deg": 0.0,
    "sampled_max_motor_force_ratio": 0.6063051559064776,
    "sampled_ctrl_clamp_excess": 0.0,
    "tail50ms_support_force_world_N": {
      "chest": [
        26.973100981798563,
        -1.9614496618710893,
        13.557892714353725
      ],
      "left_hand": [
        -13.138537882921907,
        -0.11794826298807826,
        -1.3916454105618015
      ],
      "thigh": [
        8.416835088718525,
        -0.8965499673419371,
        23.90716711981388
      ],
      "right_arm_hand": [
        -22.278035277366985,
        2.9481523601438875,
        -6.521763342011457
      ]
    },
    "worst_overlap": {
      "t": 0.005327499999999825,
      "bodies": [
        "guitar",
        "wuji_l_thumb_distal"
      ],
      "depth_mm": 0.08455006573123824
    },
    "warnings": [],
    "free_guitar": true,
    "nmocap": 0,
    "neq": 0,
    "max_body_gravcomp": 0.0
  },
  "functional_audit": {
    "scope": "Saved physical states at 500 Hz. Pad target errors and nut displacement are distinct. Contact relative velocity does not track a persistent material point. No new pass threshold.",
    "source": "static_c_stubtrackservo_T0.5",
    "summary": {
      "end_nut_world_displacement_mm": [
        -9.15489449202067,
        1.4384982271425373,
        -3.3254316165012288
      ],
      "end_pick_guitar_relative_change_mm": [
        -2.6340630217428496,
        0.5921945689068495,
        1.2021387997260655
      ],
      "end_nut_relative_thigh_displacement_mm": [
        -2.904339741335443,
        1.5181606634185885,
        9.577541374550837
      ],
      "tail50ms_pad_error_mean_mm": {
        "index_finger": 1.1131042243960012,
        "middle_finger": 0.24458569609412925,
        "ring_finger": 0.8154367693667737
      },
      "thigh": {
        "tail_sample_contact_fraction": 1.0,
        "tail_mean_tangential_speed_mm_s": 0.13997838455006184,
        "tail_mean_normal_N": 23.159200875505277,
        "tail_max_friction_utilization": 0.31142566513169107
      },
      "chest": {
        "tail_sample_contact_fraction": 1.0,
        "tail_mean_tangential_speed_mm_s": 0.0752414846857973,
        "tail_mean_normal_N": 26.728317905669375,
        "tail_max_friction_utilization": 0.647873193078633
      },
      "right_forearm": {
        "tail_sample_contact_fraction": 1.0,
        "tail_mean_tangential_speed_mm_s": 0.08118215423543163,
        "tail_mean_normal_N": 19.75476527154074,
        "tail_max_friction_utilization": 0.756117192169251
      }
    }
  },
  "fine_model_hold_confirmation": {
    "stubtrackservo": {
      "fret_tail50ms_N": [
        1.771537956469482,
        2.7065646896593814,
        1.413079208465804
      ],
      "contact_fraction": [
        1.0,
        1.0,
        1.0
      ],
      "wrong_N": 0.0,
      "tilt_deg": 8.304824863534991,
      "pick_change_mm": 2.9553544802210556,
      "nut_displacement_mm": 9.845804474269668,
      "joint_excess_deg": 0.0,
      "max_motor_ratio": 0.6063051559064776,
      "max_overlap_mm": 0.08455006573123824,
      "warnings": []
    },
    "fineservo": {
      "fret_tail50ms_N": [
        1.8454940844237182,
        2.539523297821869,
        1.4425296029995394
      ],
      "contact_fraction": [
        1.0,
        1.0,
        1.0
      ],
      "wrong_N": 0.0,
      "tilt_deg": 8.28806650192353,
      "pick_change_mm": 2.9534205604138304,
      "nut_displacement_mm": 9.912048927736553,
      "joint_excess_deg": 0.0,
      "max_motor_ratio": 0.6064748543167681,
      "max_overlap_mm": 0.08272982550664235,
      "warnings": []
    },
    "scope": "Matched0.5s cold C hold, same controller; full fine dt1.25us versus reduced dt2.5us. Not plucking/approach equivalence."
  },
  "continuous_approach": {
    "status": "first_variant_failed_followups_running",
    "failure_source": "stub_servo_approach_relative_T1",
    "hold_target_fret_force_N": [
      0,
      0,
      0
    ],
    "scope": "Cold hold success does not transfer automatically to continuous approach; coordinate and path corrections under test."
  }
}
